Need help to get ripping? Need help to get ripping?

Installation Instructions

ETM RTR 6+7 Kit Installation Instructions
 Little Bit V3 to RTR Installation Instructions These instructions are meant to serve as a guide for installing the L...
ETM RTR Headlight Kit Installation Instructions
ETM RTR Headlight Installation Instructions Remove the Crossbar from the handlebars, the Front Number Plate, the Disp...
E&C Ultimate Razor 3.0 Kit Assembly Instructions
 These instructions are intended to be a guide for installing your Razor Ultimate Kit from Electro & Company.  While ...
Razor Extreme Razor Kit Assembly Intructions
These instructions are intended to be a guide for installing your Razor Extreme Kit from Electro & Company.  While ev...
RTR CNC Footpeg Bracket Installation and Use Instructions
Installation Instructions:Remove the stock footpeg bracketInstall the new CNC footpeg bracket using the supplied hard...
Razor Display Kit Installation Instructions
Razor Display Installation Instructions Remove the front number plate from the bike. Attach the display to the displa...
The "One" Upgrade Shaft Installation Instructions
 1. Remove motor from bike2. Remove the motor sprocket from the shaft *Note the motor nut is reverse thread, righty l...
How do I install the 12v DCDC?
How the 12v DCDC works:12v DCDC Main unit has 1 input connector (3 pin) and 6 output connectors (2 pin)Identify the m...
E&C Razor Wheel Spacer Guide
Download PDF Here Razor Wheel Spacer Guide (rev B) Page 1 of 2 Page 2 of 2
TruMoto Little Bit v2
Little Bit Razor Mounting Instructions These instructions are intended to be a guide for installing your Little Bit C...
YZ-EMX Installation Instructions (EM260)
YZ-EMX Votol Installation Instructions  Ensure that the main connector is unplugged from the battery. If another cont...
SB-1626 Instructions
Photo of new part: NOTE: The new harness has a black ring terminal to the B- and a red ring terminal to the B+, pleas...