How do I install the 12v DCDC?

How the 12v DCDC works:

12v DCDC Main unit has 1 input connector (3 pin) and 6 output connectors (2 pin)
Identify the main power switch (3 Pin) and the main power harness (2 - 3 pin connectors (1 male / 1 female) and 1 - 2 pin on the other end)

2 options to get power to the unit: 1 - ring terminals directly to the positive / negative terminals on the controller or 2 - xt60 splitting the single charge lead on your battery into 2 xt60 (1 for charging, 1 for 12v DCDC) whichever one you use will connect to the 2 pin on the main power harness

Arrangement: (Power source: Controller or battery) -> Ring terminal harness or xt splitter -> 12v DCDC Main harness via 2 pin connector -> Main power switch via 3 pin connector

Note: If using the battery xt60 splitter, make sure power is the last connection to ensure safe handling and installation.

This completes the 12v DCDC and it should now supply power once you connect it to a power source and you will see that the button should illuminate when depressed.

Accessories: Accessories come with their own on/off switch which is optional. If you connect the accessories into the 2 pin output plugs, when you turn on the main 12v DCDC button, all of your accessories will turn on at the same time.

If you wish to have individual control of which accessory is powered on independent of the 12v DCDC being on, you would simply install the included accessory on/off switch and plug that to the 2 pin coming off of the 12v DCDC, then the accessory to that 2 pin connector on the on/off switch.