Service Bulletin: Rizzler Controller Harness Replacement

Subject: Controller Failure Risk: Main Harness Replacement for Rizzler Owners

Overview

Electro and Company has identified a potential risk for premature controller failure related to the main harness on certain Rizzler units. To mitigate this issue, we are sending out a new main harness to all customers who have purchased the Rizzler.

This is a precautionary measure to ensure optimal performance and prevent any future controller faults.

Parts and Instructions

• A new main harness will be shipped to the address on file from the time of the bike’s order.

• Instructions can be found by scanning the QR code below: 

Estimated Installation Time

The estimated time to replace the harnesses is approximately 30 minutes or less using basic hand tools.

Tools Required: 

• PH2 Phillips Screwdriver

• Optional: Zip ties

Important Notice

Failure to install the new parts could result in premature failure of your controller, which may void your warranty support.

We strongly recommend that you complete the installation of the new parts as soon as possible to avoid potential issues with your controller.

Contact Information

If you have any questions or need further assistance, please do not hesitate to contact our support team by submitting a ticket HERE

If you purchased your bike from an authorized dealer, they are being notified and will have the parts by mid May.